DIN1897 Straight shank twist drill
Material: HSS, carbon tool steel,alloy tool steel,(T10A,T12A 9SiCr,CrWMn) Surface finish: TiN,TiC, AlTiN.Micro hardness: HV10000,Long working life, high wear resistance and impact-resistant performance.
DIN931 DIN933 DIN934 bolt nuts in carbon steel and SS
SDMP make standard fastener in carbon steel and SS.Stock usual items bolt and nuts can meet your urgent need. Customized small color box package is available.
DIN931-HEX HEAD BOLT WITH HALF THREAD
DIN933–HEX HEAD BOLT WITH FULL THREAD
DIN934(ENISO4032)-HEXAGON NUTS
Ejector blade in Din1530FAH
Flat ejector pin with cylindrical head nitrided per Din1530FAH,Din1530F.
Material in H13(1.2344) or WS(1.2080),1.2210,1.2067(SUJ2).
Hardness: Head=455 HRC, shaft=602HRC. Surface nitrided=HV950-980 (h13),Core=40˜45HRC.Tin,TiAlN,Tic coating for choice.
Ejector sleeve DIN and JIS quality skd61
MATL:WAS(≈1.2344,1.2343,SKD61)Hot work die steel
WS: (≈1.2210, 1.2516,1.2067,skd11)
Hardened and Nitrided
Surface: min HV950 0.3 (≈HRC68) Body: HRC60-62
Core: HRC45-45 Bright or black on demandEquivalent bordignon tohatsu misumi special dai mould spring
Equivalanet quality ISO 10243 spring than bordignon tohatsu misumi special dai.Can customize color meet your market demand.
OD in mm:10,12.5,16,20,25,32,40,50,63.
Length in mm:25, 32, 38, 44, 51, 64,76, 89, 102, 115, 178, 203, 305.Eye bolt according Din580 582
Forged eye bolt metric made according DIN580/582 •Inch dimension according ANSI/ASME B18.15 •Material: carbon steel, stainless steel•When installing female lifting eye bolts DIN 582, it is important to ensure that the face is in firm contact with the mating face. •Do not apply load across the face of the ring !
Flat Tooth Compression Mould Clamping Plate
Mould clamping plate made from quality S45C carbon steel, through technologies of quenching and temptering, the full body hardness from HRC35-40. Outsurface is rustproof after bluing or plating.
Flat type Size:M10X75,M12X115,M14X125,M16X140,M18X155,M20X172,M24X200,M30X250
Guide Post and Bushing fit Die Set
SDMP produce plain guide bushing equivalent quality Misumi typeMDB( devcon adhesive type) LDB( locatite adhesive type) LFB(copper alloy type) LDBZ(oil-free type) LFBZ( copper alloy oil-free type).All bushing made of quality suj2 (chrome alloy steel) hardened HRC 58~64
Guide posts wen can make include Detachable post type and Press fit post types: MRP BRPM(for movable stopper STM) BRPK (for fixed stopper STK)MSP BSPM(for movable stopper STM) BSPK( for fixed stopper STK). All guide posts made of SUJ2 hardened HRC48~64.
Hard alloy thread tap metric size
Our thread tap made of HSS metric size mostly.Right hand thread usually no mark. This product produces as single bottom tap normall,also produce as unequal pitch set.
TiN coaring to improve life.
When order please note part no and thread id.
Hexagon socket head cap screw Din912
Hexagon Socket Head Cap Screws according DIN912(modified ISO4762)
Features:
1) Standards: JIS, DIN, BS, ANSI, ISO, GB
2) Specifications: M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36
3) Nominal Length: 10 – 200mm4)Grade: class 8.8,10.9, 12.9(high tension carbon steel)
Hss cylindrical head punch with ejector pin ISO 8020F
Hardened, tempered, shaft fine ground finished.
Completely assembled with coil spring, pin bolt and ejector.
Spring presure of ejector can be adjusted at pin bolt on head.Hot forged head. The shank of the punch is finely ground and lapped after heat treatment and tempering. The ground head guarantees that it is perfectly coaxial with the shank. The reduction is concentric to the shank with a maximum tolerance of 0.01 mm.