China Manufacturer of quality guide pillar black oxide and sandblast finish
- Description
- Inquiry
The miniture OD(outer diameter) we can do until 5mm,the larget OD uptp 60mm.
All pillar are with good finish,hardened makes this part has perfect roughness and increase its life.
Have enough stocks for normal items assure fast delivery.
Related Products
Mould cooling circuit plugs with Red or Black O ring
Features:
1)This plug is used in plastic mould, any water channel cooling,heating system,rely on requisite flow direction to match.
2) Easy installation, any position of cooling holes can innstall it.
3) Same dimension of MISUMI but improve O ring to red, can be used under higher temperature, more reliable performance,longer lifetime.
DIN and JIS quality skd61 ejector sleeve
MATL:WAS(≈1.2344,1.2343,SKD61)Hot work die steel
WS: (≈1.2210, 1.2516,1.2067)
Hardened and Nitrided
Surface: min HV950 0.3 (≈HRC67) Body: HRC60-62
Core: HRC45-45 Bright or black on demandEjector blade in Din1530FAH
Flat ejector pin with cylindrical head nitrided per Din1530FAH,Din1530F.
Material in H13(1.2344) or WS(1.2080),1.2210,1.2067(SUJ2).
Hardness: Head=455 HRC, shaft=602HRC. Surface nitrided=HV950-980 (h13),Core=40˜45HRC.Tin,TiAlN,Tic coating for choice.
CVPL mould shot counter 7 digit
•Material: glass filled nylon housing
•Standard: Hasco, Misumi, JIS, DME,DIN etc. and non standard customize is available
•Type: CVPL-100/200,CVEX-100/200,CVIN-100/200
•Size: 48mm x 38mm x 24mm.
•Punch shaft:6mm,10mmAir poppets valves similar CUMSA DME HASCO
Air poppets in metric and inch size.•Material: SUS420 or SUS 420 stainless steel ANSI, 1.4034 DIN .•Hardened:48˜52HRC. •Air pressure: 1.5˜6 BARS.•Products made in China as per DIN or ANSI standard.•Woking temperature: 220-260 centigrade degree.•Working life: about 1 million under correct operation.
Press tool pillar bush set SRP SGP series
•The guide pillar bushing set include Auto mould guide post, independent guide pillar, die set with guide post, stripper plate press with guide post.
•Material: SUJ2(en52100) hardened HRC60˜62
•Pression finish assure suitable assembly beteew bush and pillar
DIN Ejector pin according HASCO DME MISUMI
produce ejector pin according DIN,JIS, HASCO, DME standard
Material: Skd61, HSS, 1.3343, suj2, C45,
Hardness: Head Hrc45-50, body Hrc 58-60Heat treatment and oil quenching, temper-ted make the ejector pin have heavy hardness and high ductility, then prolong the working life.
Use for injection mold, plastic mould and industry producing.Quality hardened solid dowel pin Din6325
DIN 6325 /ISO8734A Dowel pin (parallel pins) made of hardened steel and stainless steel.
GB/T 119.2-2000 | GB/T 119-1986How to order: DIN6325 matl: d1*L= qty(pcs)
press fit jig bushes per DIN172A DIN179
DIN172A-press fit jig bushes with shoulder(head)
DIN179- press fit jig bushes without shoulder(straight)
Our bushing most made ofSkd61, suj2,16CrNi4,1.7262,100Cr6,AC45 or equivalent.Hardness: HRC58~62.Widely used for plastic mould, casting die,electric tool and some machine tools.Heat treatment:carburized and fine grindingConical head ejector in Din1530d
All ejector pin 60 º head formed by automatic machine according din1530d.The maximum working temperature is under 250 centigrade degree.
Material usually in din 1.2067(suj2),1.2210,1.2510 or as per customer special request.
Full body headness: 60±2 HRC, head hardness 45±5HRC
DIN1530D specification download
