Manufacturing process of die pressing plate: made of 45 # medium carbon steel as a whole, after high temperature heating and hammering itself hardness can reach above 30HRC hardness. Then the plane and long slot are machined with universal milling machine to reach 3.2 surface finish. And the parallelism and flatness of the pressure plate are not more than 0.02mm. After heat treatment and quenching, the 35HRC to 40HRC meets the requirements of JB. Finally, the surface blackening or bluish treatment is done to achieve the purpose of anti-rust.
| مقاس | د | إل | ح | H1 | د 1 | Injection machine (g) | Max Static load |
| 压板规格 | 螺纹孔 | 压板长度 | 压板高度 | 装卡高度 | 压板宽度 | 适用注塑机克数 | 最大静态载荷 |
| M12*16 | 12.5 | 115 | 50 | 15~35 | 58 | 60~80 | 60~80 |
| M16*30 | 16.5 | 130 | 70 | 15~45 | 59 | 100~300 | 100~300 |
| M16D*150 | 16.5 | 150 | 70 | 15~45 | 60 | 100~300 | 100~300 |
| M20**170 | 20.5 | 170 | 100 | 20~55 | 70 | 400~2500 | 400~2500 |
| M20D*190 | 20.5 | 190 | 100 | 20~55 | 75 | 400~2500 | 400~2500 |
| M24*220 | 25 | 220 | 110 | 20~65 | 90 | 3000~7000 | 3000~7000 |
| M24D*250 | 25 | 250 | 125 | 20~90 | 105 | 3000~7000 | 3000~7000 |
| M30*250 | 30 | 250 | 125 | 20~90 | 105 | 7000~30000 | 7000~30000 |
| M30D*275 | 30 | 275 | 125 | 20~90 | 108 | 7000~30000 | 7000~30000 |
| M36*280 | |||||||
| M36*300 |
متري الموضوع صنبور المواصفات.
